Items where Author is "Parikin, Parikin"
Article
Parikin, Parikin and Fajar, Andika and Insani, Andon and Ismoyo, Agus Hadi and Bandriyana, Bandriyana (2018) QUANTITATIVE PHASE ANALYSIS OF THE ZRNBMOGE ALLOYS USING NEUTRON DIFFRACTION TECHNIQUES. Jurnal Sains Materi Indonesia, 13 (2). pp. 130-135. ISSN 1411-1098
Dani, M and Parikin, Parikin and Dimyati, A and Rivai, A. K and Iskandar, R (2018) A NEW PRECIPITATION-HARDENED AUSTENITIC STAINLESS STEEL INVESTIGATED BY ELECTRON MICROSCOPY. International Journal of Technology, 9 (1). pp. 89-98. ISSN 2086-9614
Parikin, Parikin and Dani, Mohammad and Rivai, Abu Khalid and Ismoyo, Agus Hadi and Iskandar, Riza and Dimyati, Arbi (2018) Microstructures and Hardness of TIG Welded Experimental 57Fe15Cr25Ni Steel. Makara Journal of Technology, 22 (2). pp. 66-71.
Parikin, Parikin and Dani, M and Jahja, A.K and Iskandar, R and Mayer, J (2017) CRYSTAL STRUCTURE INVESTIGATION OF FERRITIC 73FE24CR2SI0.8MN0.1NI STEEL FOR MULTI-PURPOSE STRUCTURAL MATERIAL APPLICATIONS. International Journal of Technology (2015) 4, 2018 (1). pp. 78-88. ISSN 2086-9614
Dani, Mohammad and Parikin, Parikin and Iskandar, R. and Dimyati, A. (2017) INVESTIGATION ON PRECIPITATIONS AND DEFECTS OFTHE Fe-24Cr-2Si-0.8Mn FERRITIC SUPER ALLOY STEEL. Jurnal Sains Materi Indonesia, 18 (4). p. 173. ISSN 1411-1098
Parikin, Parikin and Sugeng, Bambang and Dani, Mohammad and Sukaryo, Sulistioso Giat (2017) KETAHANAN OKSIDASI BAJA SUPER AUSTENITIK 15%CR-25%NI PADA TEMPERATUR 850 °C. Jurnal Sains Materi Indonesia, 18 (4). ISSN 1411-1098
Parikin, Parikin and Ismoyo, Agus Hadi and Iskandar, Riza and Dimyati, Arbi (2017) Residual Stress Measurements on the TIG Weld Joint of 57Fe15Cr25Ni Austenitic Steel for Structural Material Applications by Means X-Ray Diffraction Techniques. Makara Journal of Technology, 21 (2). p. 49. ISSN 2355-2786
Dani, Mohammad and Jahja, Aziz Khan and Parikin, Parikin and Insani, Andon and Iskandar, Riza (2017) Strain analysis in ferritic filler weldment by using the modified Williamson-hall method. Malaysian Journal of Fundamental and Applied Sciences, 13 (4). pp. 754-759. ISSN 2289-5981
Parikin, Parikin and Bandriyana, Bandriyana and Ismoyo, A.H (2016) IDENTIFICATION ON ZrNbMoGe ALLOY OF 400C-1 HOUR HYDRIDATION TEST FOR CLADDING MATERIALS BY USING DIFFRACTION TECHNIQUE. Majalah Ilmiah Pengkajian Industri, 10 (1). pp. 1-8. ISSN 2541-1233
Hadi Ismoyo, Agus and Bandriyana, Bernardus and Parikin, Parikin (2016) PENGARUH IMPLANTASI ION ARGON PADA STRUKTUR MIKRO DAN KEKERASAN BAJA AISI 430 UNTUK BAHAN STRUKTUR REAKTOR. Jurnal Sains Materi Indonesia, 17 (02). pp. 90-94. ISSN 1411-1098
Parikin, Parikin and Bandriyana, Bandriyana and Ismoyo, A.H. (2016) IDENTIFIKASI BAHAN KELONGSONG PADUAN ZrNbMoGe HASIL UJI HIDRIDASI 400C - 1 JAM MENGGUNAKAN TEKNIK DIFRAKSI = IDENTIFICATION ON ZrNbMoGe ALLOY OF 400C-1 HOUR HYDRIDATION TEST FOR CLADDING MATERIALS BY USING DIFFRACTION TECHNIQUE. Majalah Ilmiah Pengkajian Industri, 10 (1). p. 1. ISSN 1410-3680
Priyanto, Tri Hardi and Parikin, Parikin and Li, Meijuan (2016) Texture Analysis using The Neutron Diffraction Method on The Non Standardized Austenitic Steel Process by Machining,Annealing, and Rolling. Makara Journal of Technology, 20 (1). p. 19. ISSN 2355-2786
Parikin, Parikin and Priyanto, Tri Hardi and Hadi Ismoyo, Agus and Dani, Mohamad (2015) EFEK ROL PANAS PADA SIFAT MEKANIK PLAT BAJA 15%Cr-25%Ni BAHAN STRUKTUR REAKTOR. Jurnal Sains Materi Indonesia, 17 (01). pp. 22-28. ISSN 1411-1098
Ismoyo, A.H and Pratiwi, S.H and Parikin, Parikin and Dani, M (2015) PENGAMATAN SIFAT MEKANIK DAN STRUKTUR MIKROKRISTAL SEKITAR LAS TIG FILER AISI 312 PADA BAJA 15%Cr25%Ni UNTUK BAHAN STRUKTUR REAKTOR. SEMINAR NASIONAL XI SDM TEKNOLOGI NUKLIR. pp. 269-274. ISSN 1978-0176
Parikin, Parikin and Allen, David (2015) Independency of Elasticity on Residual Stress of Room Temperature Rolled Stainless Steel 304 Plates for Structure Materials. Makara Journal of Technology, 19 (3). p. 97. ISSN 2355-2786
Dani, Mohammad and Untoro, Pudji and Panca Putra, Teguh Yulius Surya and Parikin, Parikin and Mayer, Joachim and Dimyati, Arbi (2015) Transmission Electron Microscopy Characterization of High-Temperatur Oxidation of Fe-20Cr-5Al Alloy Prepared by Focused Ion Beam Technique. Makara Journal of Technology, 19 (2). p. 85. ISSN 2355-2786
Parikin, Parikin and Effendi, Nurdin and Insani, Andon and Ismoyo, Agus Hadi (2014) PENGUKURAN TEGANGAN SISA PLAT BAJA STRUKTUR NON STANDAR A-2 ROL PANAS DENGAN TEKNIK DIFRAKSI NEUTRON. Jurnal Forum Nuklir STTN, 8 (2). pp. 117-124. ISSN 1978-8738
Effendi, Nurdin and Darwinto, Tri and Ismoyo, Agus Hadi and Parikin, Parikin (2014) 24-CHROMIUM FERRITIC STEEL MAGNETIC PROPERTIES. Jurnal Sains Materi Indonesia, 15 (4). pp. 187-191. ISSN 1411-1098
Bandriyana, B and Ismoyo, Agus Hadi and Parikin, Parikin (2013) Effect of Germanium to the Corrosion Resistance of Zr-nb-mo-ge Alloy for Nuclear Power Plant Fuel Cladding Material. Jurnal Sains Materi Indonesia, 14 (3). pp. 193-198. ISSN 1411-1098
Bandriyana, B and Ismoyo, Agus Hadi and Parikin, Parikin (2013) PENGARUH UNSUR GERMANIUM TERHADAP KETAHANAN KOROSI PADUAN ZR-NB-MO-GE UNTUK MATERIAL KELONGSONG PERUSAHAAN LISTRIK TENAGA NUKLIR. Jurnal Sains Materi Indonesia, 14 (3). pp. 193-198. ISSN 1411-1098
Parikin, Parikin and Bandriyana, Bandriyana and Wahyono, I. and Ismoyo, A.H. (2013) Non-destructive Residual Stress Analysis Around The Weld-Joint of Fuel Cladding Materials of ZrNbMoGe Alloys. Atom Indonesia, 39 (2). p. 65. ISSN 0126-1568
Ismoyo, Agus Hadi and Parikin, Parikin and Kuntoro, Iman and Bandriyana, B (2010) High Temperature Oxidation Tests on Zrnbmoge Alloy for Cladding of Nuclear Fuel Materials. Jurnal Sains Materi Indonesia, 11 (3). pp. 195-201. ISSN 1411-1098
Ismoyo, Agus Hadi and Bandriyana, Bandriyana and Parikin, Parikin and Kuntoro, Iman (2010) Uji Oksidasi Suhu Tinggi Paduan ZRNBMOGE UNTUK KELONGSONG BAHAN BAKAR NUKLIR. Jurnal Sains Materi Indonesia, 11 (3). pp. 195-201. ISSN 1411-1098
Parikin, Parikin and Fajar, Andika and Ismoyo, A.H and Bandriyana, B (2010) NEUTRON DIFFRACTION TECHNIQUE ON THE STRUCTURAL IDENTIFICATION OF ZrNbMoGe ALLOY. MATERIALS SCIENCE and TECHNOLOGY.
Aziz K., Jahja and Parikin, Parikin and Nurdin, Effendi (2005) The Influence of Heat Treatment Time and Temperature on the Physical Properties of Assab-Corax Steel. Atom Indonesia, 31 (2). pp. 91-102. ISSN 0126-1568
Conference or Workshop Item
wahyono, Imam and Salam, R and Dimyati, Arbi and Parikin, Parikin (2015) KARAKTERISASI STRUKTUR MIKRO MENGGUNAKAN SEM DAN XRD PADA KETAHANAN KOROSI BAJA KOMERSIAL SS430 DAN BAJA NON KOMERSIAL F1. In: SEMINAR NASIONAL XI SDM TEKNOLOGI NUKLIR, 15 SEPTEMBER 2015, Yogyakarta.
Bandriyana, B and Ismoyo, Agus Hadi and Parikin, Parikin (2012) PERUBAHAN KEKERASAN DAN STRUKTUR MIKRO AKIBAT PROSES ROL DAN LAS PADA PADUAN ZR-NB-MO-GE UNTUK MATERIAL KELONGSONG PLTN. In: Prosiding Pertemuan dan Presentasi Ilmiah - Penelitian Dasar Ilmu Pengetahuan dan Teknologi Nuklir 2012 Pusat Teknologi Akselerator dan Proses Bahan - BATAN, 4 Juli 2012, Yogyakarta,.
Supandi, Suminta and Supardi, Supardi and Parikin, Parikin (2010) THE EFFECTS OF ADDING 1 M NaOH, KOH AND HCl SOLUTION TO THE FRAMEWORK STRUCTURE OF NATURAL ZEOLITE. In: ICMST 2010, 19-23 Oktober 2010, Serpong.
Ismoyo, Agus Hadi and Parikin, Parikin and Bandriyana, Bandriyana (2009) ANALISIS STRUKTUR MIKRO DAN KRISTAL PADUAN ZrNbMoGe. In: Seminar Nasional Sains dan Teknologi Nuklir PTNBR – BATAN, 3 Juni 2009, Bandung.
Budiarto, Budiarto and Parikin, Parikin and Effendi, Nurdin and Jahja, A.K (2004) PEMBUATAN KOMPOSIT PARTIKULAT ONIX DIPERKUAT POLIESTER UNTUK BAHAN INTERIOR. In: Pertemuan Ilmiah Ilmu Pengetahuan dan Teknologi Bahan 2004, 7 September 2004, Serpong.