Gyroscopic effect on a scaled rotor-bearing system

This paper deals with scale-fullscale models of rotor-bearing systems on rotating condition. The investigation is focused on the gyroscopic effect, which causes forward and backward whirl frequencies. When the rotor-bearing system is scaled proportionally in its dimension (height, length, and width), the scaling factor of whirl frequencies can be derived. It depends on the ratio between a transverse and polar moment of inertia on its rotating axis called the gyroscopic factor. The experimental study is conducted to validate it on three scaled rotor-bearing systems, which shifts its disc from the middle of the shaft on the scale of 1:1, 2:1, and 3:1 to clearly show the gyroscopic effect on first bending natural frequency. The scaling factor is then validated using the Campbell diagram by finding its critical speed. From this critical speed, the whirl frequencies along the range of the full-scale model speed can be obtained. The result also shows that the scaling factor remains the same whether it is at rotation or rest condition. Consideration must be made on the effect of the structural design, that is, blade and support, because of its unsymmetric stiffness that can cause backward whirl frequencies. The bearing stiffness must be ensured to be scaled proportionally, especially on journal bearing cases. This finding can be used by engineers to deal with scaling method implementation on rotating machinery design.