Items where Author is "Dimyati, Arbi"

Sugeng, Bambang and Bandriyana, B and Sugeng, Bambang and Salam, Rohmad and Sumariyo, Sumariyo and Sujatno, Agus and Dimyati, Arbi (2018) Microstructure and phase analysis of Zirconia-ODS (Oxide Dispersion Strengthen) alloy sintered by APS with milling time variation. IOP Conference Series: Materials Science and Engineering, 343. 012035. ISSN 1757-8981

Parikin, Parikin and Dani, Mohammad and Rivai, Abu Khalid and Ismoyo, Agus Hadi and Iskandar, Riza and Dimyati, Arbi (2018) Microstructures and Hardness of TIG Welded Experimental 57Fe15Cr25Ni Steel. Makara Journal of Technology, 22 (2). pp. 66-71.

Yunasz (Parikin), Iing Farihin (Parikin) and Dani, Mohammad and Rivai, Abu Khalid and Ismoyo, Agus Hadi and Iskandar, Riza and Dimyati, Arbi (2018) Microstructures and Hardness of the Experimental 57Fe15Cr25Ni Steel Around TIG Weld-Joints for Reactor Structure Materials. Makara Journal of Technology, 22 (2). p. 66. ISSN 2355-2786

Bandriyana, Bandriyana and Dimyati, Arbi and Sujatno, Agus and Salam, Rohmad and Sumaryo, Sumaryo and Untoro, Pudji and Suharno, Bambang (2018) Microstructures and Hardness of the High Chromium Oxide Dispersion Strengthened Alloy Fe-25Cr-Y2O3Sintered by the Arc Plasma Sintering (APS). IOP Conference Series: Materials Science and Engineering, 333. 012045. ISSN 1757-8981

Wahyudi, Haris and Dimyati, Arbi and Sebayang, Darwin (2018) Surface martensitization of Carbon steel using Arc Plasma Sintering. IOP Conference Series: Materials Science and Engineering, 343. 012032. ISSN 1757-8981

Silalahi, Marzuki and Purwanto, Setyo and Mujamilah, Mujamilah and Dimyati, Arbi (2018) The observation of resistivity change on the ultrasonic treated Fe-Cr ODS sinter alloy under magnetic field influence. IOP Conference Series: Materials Science and Engineering, 343. 012037. ISSN 1757-8981

Purwanto, Setyo and Dimyati, Arbi and Iskandar, R and ari adi, wisnu and sumirat, tjipto (2017) MODIFIKASI PERMUKAAN FILM CVD INTAN/SILIKON(111) DENGAN IMPLANTASI ION FE + B DAN SIFAT MAGNETIK BAHAN. Jurnal Iptek Nuklir Ganendra, 20 (2). pp. 57-63. ISSN p-ISSN: 1410-6957, e-ISSN: 2503-5029

Silalahi, Marzuki and Sitompul, Henni and Manalu, Jojor Lamsihar and Dahlan, Kiagus and Noviana, Deni and Dimyati, Arbi (2017) Novel Technology on Sinthesizing Mg-Zn Biomaterial Using Arc Plasma Sintering. Asian Journal of Applied Sciences, 5 (3). pp. 518-524. ISSN 2321 – 0893

Sholehah, Amalia and Achmad, NurSumiati and Dimyati, Arbi and Dwiyanti, Yanyan and Partuti, Tri (2017) Low-Temperature Synthesis of Vertically Align ZnO Layer on ITO Glass: The Role of Seed Layer and Hydrothermal Process. In: IOP Conference Series: Materials Science and Engineering.

Zulhan, Zulfiadi and Himawan, David Mangatur and Dimyati, Arbi (2017) Reduction of lateritic iron ore briquette using coal bed reductant by isothermal - temperature gradient method. In: AIP Conference Proceeding, 2017.

Parikin, Parikin and Ismoyo, Agus Hadi and Iskandar, Riza and Dimyati, Arbi (2017) Residual Stress Measurements on the TIG Weld Joint of 57Fe15Cr25Ni Austenitic Steel for Structural Material Applications by Means X-Ray Diffraction Techniques. Makara Journal of Technology, 21 (2). p. 49. ISSN 2355-2786

Sujatno, Agus and Purwamargapratala, Yustinus and Dimyati, Arbi (2015) Mikro Karakterisasi Material Anoda Inovatif untuk Baterai Lithium Ion menggunakan SEM. In: Seminar Nasional XXIV Kimia dalam Industri dan Lingkungan, 19 November 2015, Hotel Phoenix, Yogyakarta.

Salam, Rohmad and Sujatno, Agus and Bandriyana, Bandriyana and Purwamargapratala, Yustinus and Dimyati, Arbi (2015) Studi Oksida Paduan Zirkonium ZrNbMoGe menggunakan Thermogravimetri. In: Seminar Nasional XXIV Kimia dalam Industri dan Lingkungan, 19 November 2015, Hotel Phoenix, Yogyakarta.

Sujatno, Agus and Salam, Rohmad and Bandriyana, Bandriyana and Dimyati, Arbi (2015) STUDI SCANNING ELECTRON MICROSCOPY (SEM) UNTUK KARAKTERISASI PROSES OXIDASI PADUAN ZIRKONIUM. urnal Forum Nuklir (JFN), 9 (1). pp. 44-50.

Handayani, Ari and Bandriyana, Bernadus and Sujitno, Tjipto and Dimyati, Arbi (2015) EFFECT OF Ti-ION IMPLANTATION ON THE MECHANICAL AND CORROSION PROPERTIES OF THE FeCrNi SUPER ALLOY. Proceeding of 2nd Nuclear Energy Technology Seminar Denpasar, October 15-16, 2015. ISSN 2355-7524

Sujatno, Agus and Bandriyana, Bandriyana and Purwamargapratala, Yustinus and Dimyati, Arbi (2015) Analisa SEM Pembentukan Lapisan Oksida pada Paduan ZrNbMoGe setelah Proses Quenching. In: Seminar Nasional XVIII Kimia dalam Pembangunan, 17 September 2015, Hotel Phoenix, Yogyakarta.

wahyono, Imam and Salam, R and Dimyati, Arbi and Parikin, Parikin (2015) KARAKTERISASI STRUKTUR MIKRO MENGGUNAKAN SEM DAN XRD PADA KETAHANAN KOROSI BAJA KOMERSIAL SS430 DAN BAJA NON KOMERSIAL F1. In: SEMINAR NASIONAL XI SDM TEKNOLOGI NUKLIR, 15 SEPTEMBER 2015, Yogyakarta.

Mustika, Deni and Sihombing, Riwandi and Pribadi, Slamet and Langenati, Ratih and Sujatno, Agus and Dimyati, Arbi and Setiawan, Jan and Indarto, Eddy (2015) KARAKTERISTIK PERMUKAAN SERAT SILIKON KARBIDA HASIL PEMINTALAN LISTRIK DARI POLYCARBOSILANE DALAM N,N-DIMETILFORMAMIDA (DMF)/ TOLUENA. Urania Jurnal Ilmiah Daur Bahan Bakar Nuklir, 21 (1). ISSN 0852-4777

Dani, Mohammad and Untoro, Pudji and Panca Putra, Teguh Yulius Surya and Parikin, Parikin and Mayer, Joachim and Dimyati, Arbi (2015) Transmission Electron Microscopy Characterization of High-Temperatur Oxidation of Fe-20Cr-5Al Alloy Prepared by Focused Ion Beam Technique. Makara Journal of Technology, 19 (2). p. 85. ISSN 2355-2786

Bandriyana, Bernardus and Prajitno, Djoko Hadi and Dimyati, Arbi (2014) Effect of Copper Addition on the High Temperature Oxidation of Zirconium Alloy ZrNbMoGe for Advanced Reactor Fuel Cladding Material. Advanced Materials Research, 896. pp. 617-620. ISSN 1662-8985

Silalahi, Marzuki and Dimyati, Arbi and Harjanto, Sri and Untoro, Pudji and Suharno, Bambang (2014) Microalloying of Fe-Cr by using Ultrasonic Irradiation. International Journal of Technology, 5 (2). p. 169. ISSN 2086-9614

Arifin, Yalun and Tanudjaja, Ellen and Dimyati, Arbi and Pinontoan, Reinhard (2014) A Second Generation Biofuel from Cellulosic Agricultural By-product Fermentation Using Clostridium Species for Electricity Generation. Energy Procedia, 47. pp. 310-315. ISSN 18766102

Salam, Rohmad and Bandriyana, Bandriyana and Dimyati, Arbi (2013) UJI FUNGSI MAGNETIC SUSPENSION BALANCE MSB)UNTUK PENELITIAN MATERIAL SUHU TINGGI. In: SEMINAR NASIONAL IX, 31 Oktober 2013, YOGYAKARTA.

Rivai, Abu Khalid and Dimyati, Arbi and Silalahi, Marzuki and Salam, Rohmad and Sujatno, Agus (2012) STUDI AWAL SINTESIS BAJA OXIDE DISPERSION STRENGTHENED DENGAN MEMANFAATKAN SUMBER DAYA ALAM LOKAL. In: Pertemuan Ilmiah Iptek Bahan 2012, 3 Oktober 2012, Serpong.

Dimyati, Arbi (2009) MODIFIKASI PEMBENTUKAN LAPISAN Zn PADA PERMUKAAN BAJA DUAL FASA DENGAN NITRIDASI RINGAN. Widyariset, 12 (1). ISSN 2461-0976

Richter, Silvia and Bode, Hans and Dimyati, Arbi and Mayer, Joachim (2008) Application of EPMA and analytical TEM to brazed metal-supported catalytic converters. Microchimica Acta, 161 (3-4). pp. 405-411. ISSN 0026-3672

Polop, Celia and Rosiepen, Christian and Bleikamp, Sebastian and Drese, Robert and Mayer, Joachim and Dimyati, Arbi and Michely, Thomas (2007) The STM view of the initial stages of polycrystalline Ag film formation. In: IOP Conference Series: Materials Science and Engineering.

Lee, Hwa-Teng and Mayer, Joachim and Hsu, Fu-Chuan and Rehbach, Werner P. and Weirich, Thomas and Dimyati, Arbi and Tai, Tzu-Yao (2006) Application of EDM Hole-Drilling Method to the Measurement of Residual Stress in Tool and Carbon Steels. Journal of Engineering Materials and Technology, 128 (3). p. 468. ISSN 00944289