Items where Author is "Bandriyana, Bandriyana"

Parikin, Parikin and Fajar, Andika and Insani, Andon and Ismoyo, Agus Hadi and Bandriyana, Bandriyana (2018) QUANTITATIVE PHASE ANALYSIS OF THE ZRNBMOGE ALLOYS USING NEUTRON DIFFRACTION TECHNIQUES. Jurnal Sains Materi Indonesia, 13 (2). pp. 130-135. ISSN 1411-1098

Bandriyana, Bandriyana and Dimyati, Arbi and Sujatno, Agus and Salam, Rohmad and Sumaryo, Sumaryo and Untoro, Pudji and Suharno, Bambang (2018) Microstructures and Hardness of the High Chromium Oxide Dispersion Strengthened Alloy Fe-25Cr-Y2O3Sintered by the Arc Plasma Sintering (APS). IOP Conference Series: Materials Science and Engineering, 333. 012045. ISSN 1757-8981

Bandriyana, Bandriyana and Sujatno, A and Salam, R and Sugeng, B and Dimyati, A (2017) High temperature Oxidation of ODS alloy with zirconia dispersions synthesized using Arc Plasma Sintering. International Conference on Advanced Materials for Better Future 2016, 176. pp. 1-6.

Parikin, Parikin and Bandriyana, Bandriyana and Ismoyo, A.H (2016) IDENTIFICATION ON ZrNbMoGe ALLOY OF 400C-1 HOUR HYDRIDATION TEST FOR CLADDING MATERIALS BY USING DIFFRACTION TECHNIQUE. Majalah Ilmiah Pengkajian Industri, 10 (1). pp. 1-8. ISSN 2541-1233

Bandriyana, Bandriyana and Nevinggo, M and Abu Khalid, R and Dimyati, A (2016) Effect of β-Quenching on Oxidation Resistance of Zirconium Alloy ZrNbMoGe for Fuel Cladding Material. ICoNETS Conference Proceedings International Conference on Nuclear Energy Technologies and Sciences, 2016. pp. 1-6.

Parikin, Parikin and Bandriyana, Bandriyana and Ismoyo, A.H. (2016) IDENTIFIKASI BAHAN KELONGSONG PADUAN ZrNbMoGe HASIL UJI HIDRIDASI 400C - 1 JAM MENGGUNAKAN TEKNIK DIFRAKSI = IDENTIFICATION ON ZrNbMoGe ALLOY OF 400C-1 HOUR HYDRIDATION TEST FOR CLADDING MATERIALS BY USING DIFFRACTION TECHNIQUE. Majalah Ilmiah Pengkajian Industri, 10 (1). p. 1. ISSN 1410-3680

Bandriyana, Bandriyana and Ismoyo, Agus Hadi and Sujitno, Tjipto and Dimyati, A. (2016) Microstructure and oxidation behavior of high strength steel AISI 410 implanted with nitrogen ion. In: AIP Conference Proceedings, 2016.

Salam, Rohmad and Sujatno, Agus and Bandriyana, Bandriyana and Purwamargapratala, Yustinus and Dimyati, Arbi (2015) Studi Oksida Paduan Zirkonium ZrNbMoGe menggunakan Thermogravimetri. In: Seminar Nasional XXIV Kimia dalam Industri dan Lingkungan, 19 November 2015, Hotel Phoenix, Yogyakarta.

Sujatno, Agus and Salam, Rohmad and Bandriyana, Bandriyana and Dimyati, Arbi (2015) STUDI SCANNING ELECTRON MICROSCOPY (SEM) UNTUK KARAKTERISASI PROSES OXIDASI PADUAN ZIRKONIUM. urnal Forum Nuklir (JFN), 9 (1). pp. 44-50.

Sujatno, Agus and Bandriyana, Bandriyana and Purwamargapratala, Yustinus and Dimyati, Arbi (2015) Analisa SEM Pembentukan Lapisan Oksida pada Paduan ZrNbMoGe setelah Proses Quenching. In: Seminar Nasional XVIII Kimia dalam Pembangunan, 17 September 2015, Hotel Phoenix, Yogyakarta.

Bandriyana, Bandriyana and Rivai, A.K. and Prajitno, J.H. and Dimyati, A. (2015) High Temperature Oxidation of the Hot Rolled ZrNbMoGe Alloy for Fuel Cladding Material of Pressurized Water Reactor. Advanced Materials Research, 1123. pp. 356-359. ISSN 1662-8985

Bandriyana, Bandriyana and Ismoyo, Agus Hadi and Sujitno, Tjipto and Dimyati, A (2015) Microstructure and Oxidation Behavior of High Strength Steel AISI 410 Implanted with Nitrogen Ion. The 3rd International Conference on Advanced Materials Science and Technology (ICAMST 2015). pp. 1-7.

Nastiti, Gemini and Handani, Sri and Bandriyana, Bandriyana (2014) PENGARUH PROSES OKSIDASI PADA LOGAM PADUAN Zr-2,5Nb UNTUK MATERIAL BIOIMPLAN. Jurnal Fisika Unand, 3 (4). pp. 205-213. ISSN 2302-8491

Salam, Rohmad and Bandriyana, Bandriyana and Dimyati, Arbi (2013) UJI FUNGSI MAGNETIC SUSPENSION BALANCE MSB)UNTUK PENELITIAN MATERIAL SUHU TINGGI. In: SEMINAR NASIONAL IX, 31 Oktober 2013, YOGYAKARTA.

Parikin, Parikin and Bandriyana, Bandriyana and Wahyono, I. and Ismoyo, A.H. (2013) Non-destructive Residual Stress Analysis Around The Weld-Joint of Fuel Cladding Materials of ZrNbMoGe Alloys. Atom Indonesia, 39 (2). p. 65. ISSN 0126-1568

Bandriyana, Bandriyana and Sitandung, YB (2012) Characteristic test of the coil detector on the magnet for reactor control rod; Pengujian karakteristik detektor koil pada magnet batang kendali reaktor. In: Conference: 8. National Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities, Seminar Nasional ke-8 Teknologi dan Keselamatan PLTN Serta Fasilitas Nuklir, Jakarta.

Effendi, Nurdin and Jahja, A.K and Bandriyana, Bandriyana and Ari Adi, Wisnu (2012) SOME DATA OF SECOND SEQUENCE NON STANDARD AUSTENITIC INGOT, A2. Urania, 18 (1). pp. 1-58. ISSN 2528-0473

Ismoyo, Agus Hadi and Bandriyana, Bandriyana and Parikin, Parikin and Kuntoro, Iman (2010) Uji Oksidasi Suhu Tinggi Paduan ZRNBMOGE UNTUK KELONGSONG BAHAN BAKAR NUKLIR. Jurnal Sains Materi Indonesia, 11 (3). pp. 195-201. ISSN 1411-1098

Ismoyo, Agus Hadi and Parikin, Parikin and Bandriyana, Bandriyana (2009) ANALISIS STRUKTUR MIKRO DAN KRISTAL PADUAN ZrNbMoGe. In: Seminar Nasional Sains dan Teknologi Nuklir PTNBR – BATAN, 3 Juni 2009, Bandung.

Suminta, Supardi and Bandriyana, Bandriyana (2007) KARAKTERISASI BAHAN PADUAN AL-SI HASIL PROSES SQUEEZE CASTING. Jurnal Sains Materi Indonesia, 9 (3). pp. 272-277. ISSN 1411-1098

Bandriyana, Bandriyana (2005) ANALISIS TEGANGAN PADA BENGKOKAN PIPA DALAM SISTEM PEMIPAAN FASILITAS NUKLIR DENGAN METODE ELEMEN HINGGA. In: Semiloka Teknologi Simulasi dan Komputasi serta Aplikasi 2005.

Bandriyana, Bandriyana and Untoro, Pudji and Sugiono, Bambang (2003) Uji Oksidasi Baja ASIS 316L Untuk Bahan Komponen PLTN Maju. Jurnal Sains dan Teknologi Nuklir Indonesia, 4. pp. 27-41. ISSN 1411-3481

Bandriyana, Bandriyana and Sitandung, YB (2002) PENGUJIAN KARAKTERISTIK DETEKTOR KOIL PADA MAGNET BATANG KENDALl REAKTOR. In: Seminar Nasional ke-8 Teknologi don Keselamatan PL1N Serlo Fasilitas Nuklir Jakarta.

Bandriyana, Bandriyana and Pudjijanto MS, PMS (2000) EVALUASI UNJUK KERJA MCA-MICRONOMAD RSG-GAS. PROSIDING SEMINAR HASIL PENELITIAN PTRR. ISSN 0854-5278